 |
|
| Operator control and monitoring |
| Alarms |
Fault messages, operating messages (no buffer) |
| Operating / fault messages |
| ● Operating messages |
|
| — Operating messages, max. |
total number of operation and fault messages |
| — Number of entries in operational log, max. |
not retentive |
| ● Fault messages |
|
| — Number of fault message, max. |
total number of operation and fault messages |
| — Number of entries in fault message buffer, max. |
not retentive |
| Recipes |
| ● Data records per recipe, max. |
limited due to storage medium |
| ● Recipe data memory, max. |
expandable using Compact Flash Card (CF-Card) |
| Display |
| Design of display |
STN, CCFL backlit, 5.7" blue mode (4 blue tones) |
| Control elements |
| Keyboard |
| ● Type |
Touch (resistive/analog) |
| Input current |
| Current consumption, typ. |
idling |
| Inrush current, max. |
for 70 ms |
| Digital outputs |
| ● from load voltage L , max. |
per group |
| Memory |
| Compact Flash Card |
Optional |
| Backup |
| ● present |
Guaranteed by MMC (maintenance-free) |
| CPU-blocks |
| DB |
| ● Number, max. |
DB 0 reserved |
| FB |
| ● Number, max. |
see instruction list |
| FC |
| ● Number, max. |
see instruction list |
| OB |
| ● Number, max. |
see instruction list |
| Counters, timers and their retentivity |
| S7 counter |
| Retentivity |
| — preset |
Z 0 to Z 7 |
| IEC counter |
| ● Type |
SFB |
| ● Number |
Unlimited (limited only by RAM capacity) |
| S7 times |
| Retentivity |
| — preset |
No retentivity |
| IEC timer |
| ● Type |
SFB |
| ● Number |
Unlimited (limited only by RAM capacity) |
| Data areas and their retentivity |
| retentive data area in total (incl. times, counters, flags), max. |
all |
| Flag |
| ● Retentivity preset |
MB 0 to MB 15 |
| ● Number of clock memories |
1 memory byte |
| Address area |
| Process image |
| Default addresses of the integrated channels |
| — Digital inputs |
124.0 to 126.7 |
| — Digital outputs |
124.0 to 125.7 |
| — Analog inputs |
752 to 761 |
| — Analog outputs |
752 to 755 |
| Hardware configuration |
| Rack |
| ● Modules per rack, max. |
4 in subrack 0; 8 in subracks 1 and 2; 7 in subrack 3 |
| Time of day |
| Clock |
| ● Backup time |
At 40 °C ambient temperature |
| Operating hours counter |
| ● Number/Number range |
0 |
| ● Range of values |
0 to 2^31 hours (when using SFC 101) |
| ● Granularity |
1 hour |
| ● retentive |
Must be restarted at each restart |
| Digital inputs |
| Input voltage |
| ● for signal "0" |
-3 to 5V |
| ● for signal "1" |
15 to 30 V |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — Parameterizable |
0.1 / 0.5 / 3 / 15 ms |
| Cable length |
| ● Cable length, shielded, max. |
100 m for technological functions |
| Technological functions |
| — shielded, max. |
at maximum count frequency |
| — Unshielded, max. |
Unshielded cables are not permissible for technological functions |
| Digital outputs |
| short-circuit protection |
Clocked electronically |
| ● Response threshold, typ. |
1 A |
| Limitation of inductive shutdown voltage to |
L (-48 V) |
| Output voltage |
| ● for signal "1", min. |
L (-0.8 V) |
| Analog inputs |
| Integrated channels (AI) |
and 1x PT100 |
| permissible input frequency for current input (destruction limit), max. |
continuous, max. 24 V momentarily |
| permissible input voltage for voltage input (destruction limit), max. |
Permanent |
| permissible input current for voltage input (destruction limit), max. |
Permanent |
| permissible input current for current input (destruction limit), max. |
Permanent |
| Technical unit for temperature measurement adjustable |
Degrees Celsius / degrees Fahrenheit / Kelvin |
| Input ranges (rated values), resistors |
| ● Measured current, typ. |
1.8 to 3.3 mA |
| Characteristic linearization |
| ● Parameterizable |
by software |
| — for resistance thermometer |
Pt 100 |
| Analog outputs |
| Connection of actuators |
| ● for voltage output two-wire connection |
Without compensation of the line resistances |
| Destruction limits against externally applied voltages and currents |
| ● Voltages at the outputs towards MANA |
Permanent |
| ● Current, max. |
Permanent |
| Analog value creation |
| Measurement principle |
Actual value encryption (successive approximation) |
| Integration and conversion time/resolution per channel |
| ● Integration time, parameterizable |
2,5 / 16,6 / 20 ms |
| Encoder |
| Connection of signal encoders |
| ● for current measurement as 2-wire transducer |
with external supply |
| ● for resistance measurement with two-wire connection |
Without compensation of the line resistances |
| Interfaces |
| Number of printer interfaces |
serial |
| 1st interface |
| Interface type |
Integrated RS 485 interface |
| Physics |
RS 485 |
| MPI |
| Services |
| — S7 communication, as client |
Via CP and loadable FB |
| 2nd interface |
| Interface type |
Integrated RS 485 interface |
| Physics |
RS 485 |
| Number of connection resources |
12 |
| DP master |
| ● Number of connections (of which reserved), max. |
1 for PG, 1 for OP |
| DP slave |
| Services |
| — Routing |
Only with active interface |
| Communication functions |
| S7 basic communication |
| ● User data per job (of which consistent), max. |
76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server) |
| S7 communication |
| ● As client |
Via CP and loadable FB |
| ● User data per job, max. |
With PUT/GET |
| S5-compatible communication |
| ● supported |
Via CP and loadable FB |
| Number of connections |
| ● Number of logical connections (also in network), max. |
1 fixed with integral CPU |
| S7 message functions |
| Number of login stations for message functions, max. |
Depending on the configured connections for PG/OP and S7 basic communication |
| Test commissioning functions |
| Status/control |
| ● Variables |
Inputs, outputs, memory bits, DB, times, counters |
| Integrated Functions |
| Number of frequency meters |
Frequency meter up to max. 60 kHz |
| Integrated function blocks (closed-loop control) |
PID controller |
| Number of pulse outputs |
Pulse outputs up to 2.5 kHz |
| Galvanic isolation |
| Galvanic isolation analog inputs |
| ● Galvanic isolation analog inputs |
common for analog I/O |
| Galvanic isolation analog outputs |
| ● Galvanic isolation analog outputs |
common for analog I/O |
| Permissible potential difference |
| between different circuits |
75 VDC / 60 VAC |
| between inputs and MANA (UCM) |
8 V DC |
| between MANA and M internally (UISO) |
75 VDC / 60 VAC |
| Isolation |
| Isolation checked with |
500 V DC |
| EMC |
| Interference immunity against discharge of static electricity |
| ● Interference immunity against discharge of static electricity acc. to IEC 61000-4-2 |
±6 kV contact discharge acc. to IEC 61000-4-2, ESD; ±8 kV air discharge acc. to IEC 61000-4-2, ESD |
| Interference immunity to cable-borne interference |
| ● Interference immunity on signal lines acc. to IEC 61000-4-4 |
±2 kV to IEC 61000-4-4, Burst |
| Surge immunity |
| ● on the supply lines acc. to IEC 61000-4-5 |
Surge measurements with additional protection elements: ±1 kV (to IEC 61000-4-5; µs pulse / line to line);±2 kV (to IEC 61000-4-5; µs pulse / line to ground) |
| Immunity against high-frequency electromagnetic fields |
| ● Interference immunity against high-frequency radiation acc. to IEC 61000-4-3 |
10 V/m, with 80% amplitude modulation at 1 kHz, 80 MHz to 1 GHz (to IEC 61000-4-3); 10 V/m, pulse-modulated 50% duty cycle at 900 MHz and 1.89 GHz (to IEC61000-4-3) |
| Immunity against conducted interference induced by high-frequency fields |
| ● Interference immunity against high-frequency radiation acc. to IEC 61000-4-6 |
10 V/m, with 80% amplitude modulation at 1 kHz, 10 kHz to 80 MHz (acc. to IEC 61000-4-6) |
| Degree and class of protection |
| Degree of protection to EN 60529 |
|
| ● IP20 |
Housing |
| ● IP65 |
Front |
| Ambient conditions |
| Environmental conditions |
Not suitable for open-air use |
| Vibrations |
| ● Operation, checked according to IEC 60068-2-6 |
10 to 58 Hz: Amplitude 0.075 mm; 58 to 150 Hz: Acceleration 9.8 m/s2 |
| ● Transport tested checked to IEC 60068-2-6 |
5 to 9 Hz: amplitude 3.5 mm; 9 to 500 Hz: acceleration 9.8 m/s (storage/transport in the packaging) |
| Shock test |
| ● checked according to IEC 60068-2-27 |
IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms |
| Shock testing |
| ● Operation, checked according to IEC 60068-2-29 |
Half-sine: 150 m/s2 (15 g), 11 ms, 18 shocks |
| ● Storage/transport, checked to IEC 60068-2-29 |
250 m/s2 (25 g), 6 ms, 1000 shocks |
| Fire resistance |
| ● Terminal strips |
FV2 (tested to IEC 60707) |
| ● Basic performance in housing |
FV0 |
| Configuration |
| Configuration software |
| ● STEP 7 |
V5.1 SP3, STEP 7 Lite |
| ● ProTool |
or SIMATIC ProTool/Pro Configuration, Version 6.0 SP1 or higher |
| ● ProTool/Pro |
Configuration also with WinCC flexible |
| programming |
| ● Command set |
see instruction list |
| ● System functions (SFC) |
see instruction list |
| ● System function blocks (SFB) |
see instruction list |
| last modified: |
17.09.2014 |
