 |
SIMATIC DP, ELECTRON. MODULE F. ET200S, 4 F-DO PROFISAFE, DC 24V/2A, 30 MM WIDTH UP TO CATEGORY 4 (EN954-1) ALSO USEABLE IN PROFINET- NETWORKS WITH IM151-3 HF |
| Supply voltage |
| Load voltage L |
| ● Rated value (DC) |
24 V |
| ● Reverse polarity protection |
No |
| Input current |
| from load voltage L (without load), max. |
typ. 100 mA |
| from backplane bus 3.3 V DC, max. |
28 mA |
| Power loss |
| Power loss, typ. |
3.5 W |
| Digital outputs |
| Number of digital outputs |
4 |
| Limitation of inductive shutdown voltage to |
typ. (L ) -47 V |
| Controlling a digital input |
No |
| Switching capacity of the outputs |
| ● Lamp load, max. |
10 W |
| Load resistance range |
| ● lower limit |
12 Ω |
| ● upper limit |
1 kΩ |
| Output voltage |
| ● for signal "1", min. |
L (-2,0 V), current sourcing switch: L (-1,5 V), voltage drop on current sinking switch: max. 0.5 V |
| Output current |
| ● for signal "1" rated value |
2 A |
| ● for signal "1" permissible range for 0 to 60 °C, min. |
20 mA |
| ● for signal "1" permissible range for 0 to 60 °C, max. |
2.4 A |
| ● for signal "0" residual current, max. |
0.5 mA; Current-sourcing: max. 0.5 mA; Current sinking: max. 4 mA |
| Parallel switching of 2 outputs |
| ● for uprating |
No |
| ● for redundant control of a load |
No |
| Switching frequency |
| ● with resistive load, max. |
30 Hz |
| ● with inductive load, max. |
0.1 Hz |
| ● on lamp load, max. |
10 Hz |
| Total current of the outputs (per group) |
| all mounting positions |
| — up to 60 °C, max. |
4 A |
| horizontal installation |
| — up to 40 °C, max. |
6 A |
| — up to 55 °C, max. |
5 A |
| vertical installation |
| — up to 40 °C, max. |
4 A |
| Cable length |
| ● Cable length, shielded, max. |
200 m |
| ● Cable length unshielded, max. |
200 m |
| Interrupts/diagnostics/status information |
| Diagnostic messages |
| ● Diagnostic functions |
Yes |
| ● Wire-break |
Yes |
| ● Short-circuit |
Yes |
| Diagnostics indication LED |
| ● Group error SF (red) |
Yes |
| ● Status indicator digital output (green) |
Yes |
| Galvanic isolation |
| Galvanic isolation digital outputs |
| ● between the channels |
No |
| ● between the channels and the backplane bus |
Yes |
| ● between the channels and the load voltage L |
No |
| Standards, approvals, certificates |
| Highest safety class achievable in safety mode |
| ● acc. to EN 954 |
Cat. 4 |
| ● acc. to IEC 61508 |
SIL 3 |
| Dimensions |
| Width |
30 mm |
| Height |
81 mm |
| Depth |
52 mm |
| Weights |
| Weight, approx. |
85 g |
| last modified: |
21.08.2014 |
