 |
|
| Supply voltage |
| Load voltage L |
| ● Rated value (DC) |
24 V |
| ● permissible range, lower limit (DC) |
20.4 V |
| ● permissible range, upper limit (DC) |
28.8 V |
| ● Reverse polarity protection |
Yes |
| Input current |
| from load voltage L (without load), max. |
45 mA |
| from backplane bus 3.3 V DC, max. |
10 mA |
| Encoder supply |
| 24 V encoder supply |
| ● 24 V |
Yes; L (-0.8 V) |
| ● Short-circuit protection |
Yes |
| ● Output current, max. |
500 mA |
| Power loss |
| Power loss, typ. |
2 W |
| Hardware configuration |
| Module exchange |
| ● Module exchange during operation of the IM-DP |
Yes |
| ● Module exchange under process voltage |
Yes |
| Digital inputs |
| Number of digital inputs |
1 |
| Functions |
Gate control, synchronization, latch function |
| Input characteristic curve in accordance with IEC 61131, type 2 |
Yes |
| Input voltage |
| ● Rated value, DC |
24 V |
| ● for signal "0" |
-30 to 5 V |
| ● for signal "1" |
11 to 30 V |
| Input current |
| ● for signal "0", max. (permissible quiescent current) |
2 mA |
| ● for signal "1", typ. |
9 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — at "0" to "1", max. |
2.5 µs |
| Cable length |
| ● Cable length, shielded, max. |
50 m |
| Digital outputs |
| Number of digital outputs |
2 |
| Short-circuit protection |
Yes |
| ● Response threshold, typ. |
2.6 A to 4 A |
| Limitation of inductive shutdown voltage to |
L (-50 to -60 V) |
| Controlling a digital input |
Yes |
| Switching capacity of the outputs |
| ● Lamp load, max. |
10 W |
| Output voltage |
| ● Rated value (DC) |
24 V |
| ● for signal "0", max. |
3 V |
| ● for signal "1", min. |
L (-1 V) |
| Output current |
| ● for signal "1" rated value |
2 A |
| ● for signal "1" permissible range for 0 to 60 °C, min. |
5 mA |
| ● for signal "1" permissible range for 0 to 60 °C, max. |
2.4 A |
| ● for signal "0" residual current, max. |
0.5 mA |
| Output delay with resistive load |
| ● "0" to "1", max. |
100 µs |
| Switching frequency |
| ● with resistive load, max. |
100 Hz |
| ● with inductive load, max. |
2 Hz |
| ● on lamp load, max. |
10 Hz |
| Cable length |
| ● Cable length, shielded, max. |
1 000 m |
| ● Cable length unshielded, max. |
600 m |
| Encoder |
| Number of connectable encoders, max. |
1 |
| Connectable encoders |
| ● Incremental encoder (symmetrical) |
Yes |
| Encoder signals, incremental encoder (symmetrical) |
| ● Trace mark signals |
A, notA, B, notB, A and B offset by 90° |
| ● Zero mark signal |
N, notN |
| ● Input signal |
5 V difference signal (phys. RS 422) |
| ● Input frequency, max. |
650 kHz |
| ● Cable length, shielded, max. |
50 m; > 500 kHz: 30 m |
| Interrupts/diagnostics/status information |
| Diagnostic messages |
| ● Diagnostic functions |
Yes |
| Diagnostics indication LED |
| ● Group error SF (red) |
Yes |
| ● Status indicator digital output (green) |
Yes |
| ● Status indicator digital input (green) |
Yes |
| ● Status indicator backward counting (green) |
Yes |
| ● Status indicator forward counting (green) |
Yes |
| ● Synchronization SYN (green) |
Yes |
| Integrated Functions |
| Measuring functions |
| Measuring range |
| — Frequency measurement, min. |
0.1 Hz |
| — Frequency measurement, max. |
100 kHz |
| — Cycle duration measurement, min. |
10 µs |
| — Cycle duration measurement, max. |
120 s |
| — Velocity measurement, min. |
1 1/min |
| — Velocity measurement, max. |
25 000 1/min |
| Counter |
| Number of counter inputs |
1; 32 Bit |
| Parameter |
| Remark |
16 byte |
| Galvanic isolation |
| Galvanic isolation digital inputs |
| ● Galvanic isolation digital inputs |
No; only opposite shielding |
| Galvanic isolation counter |
| ● between the channels and the backplane bus |
Yes |
| ● between the channels and the load voltage L |
No |
| Dimensions |
| Width |
30 mm |
| Height |
81 mm |
| Depth |
52 mm |
| Weights |
| Weight, approx. |
65 g |
| last modified: |
21.08.2014 |
