- |
SIMATIC DP, ELECT. SUBMODULE FOR ET 200ISP, 4 DO, DC 23,1V/20MA |
|
| Input current |
| from load voltage L (without load), max. |
340 mA |
| Power losses |
| Power loss, typ. |
2.5 W |
| Digital outputs |
| Number of digital outputs |
4 |
| No-load voltage Uao (DC) |
23.1 V |
| Internal resistor Ri |
275 Ω |
| Trend key points E |
| Voltage Ue (DC) |
17.1 V |
| Current Ie |
20 mA |
| Output delay with resistive load |
| "0" to "1", max. |
2 ms |
| "1" to "0", max. |
1.5 ms |
| Parallel switching of 2 outputs |
| for increased power |
Yes |
| Switching frequency |
| with resistive load, max. |
100 Hz |
| with inductive load, max. |
2 Hz |
| Cable length |
| Cable length, shielded, max. |
200 m |
| Cable length unshielded, max. |
200 m |
| Interrupts/diagnostics/status information |
| Alarms |
| Alarms |
No |
| Diagnostic alarm |
Yes; Parameterizable |
| Diagnostic messages |
| Diagnostic information readable |
Yes |
| Wire break |
Yes; R > 10 kohms, I < 100 µA |
| Short circuit |
Yes; R< 800 ohms (one output), R< 40 ohms (outputs connected in parallel) |
| Diagnostics indication LED |
| Group error SF (red) |
Yes |
| Status indicator digital output (green) |
Yes; Per channel |
| Galvanic isolation |
| Galvanic isolation digital outputs |
| between the channels |
No |
| between the channels and the backplane bus |
Yes |
| between the channels and the load voltage L |
Yes |
| Permissible potential difference |
| between different circuits |
60V DC/30V AC |
| Standards, approvals, certificates |
| CE mark |
Yes |
| Use in hazardous areas |
| Type of protection acc. to EN 50020 (CENELEC) |
II2 G (1) GD EEx ib[ia] IIC T4 |
| Type of protection acc. to KEMA |
04 ATEX 1249 |
| Dimensions |
| Width |
30 mm |
| Height |
129 mm |
| Depth |
136.5 mm |
| Weights |
| Weight, approx. |
255 g |
| Status |
Jun 6, 2014 |
