 |
|
| Supply voltage |
| 120 V AC |
Yes |
| permissible range, lower limit (AC) |
74 V |
| permissible range, upper limit (AC) |
132 V |
| Line frequency |
| ● permissible frequency range, lower limit |
47 Hz |
| ● permissible frequency range, upper limit |
63 Hz |
| Mains buffering |
| ● Mains buffering, min. |
20 ms |
| Input current |
| from supply voltage L , max. |
160 mA |
| Power losses |
| Power loss, typ. |
15.1 W |
| Digital inputs |
| Number of digital inputs |
8 |
| Input characteristic curve in accordance with IEC 61131, type 2 |
Yes |
| Input voltage |
| ● Rated value, AC |
120 V |
| Input current |
| ● for signal "0", max. (permissible quiescent current) |
4 mA |
| ● for signal "1", typ. |
9 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — at "0" to "1", min. |
2 µs |
| — at "0" to "1", max. |
14 µs |
| — at "1" to "0", min. |
6 ms |
| — at "1" to "0", max. |
25 µs |
| Cable length |
| ● Cable length for NAMUR input, shielded, max. |
1 000 m |
| Digital outputs |
| Number of digital outputs |
8 |
| Controlling a digital input |
Yes |
| Switching capacity of the outputs |
| ● Lamp load, max. |
50 W |
| Output current |
| ● for signal "1" rated value |
2 A |
| ● for signal "1" permissible range for 0 to 60 °C, min. |
10 mA |
| ● for signal "1" permissible range for 0 to 60 °C, max. |
2 A |
| ● for signal "0" residual current, max. |
0 mA |
| Output delay with resistive load |
| ● "0" to "1", max. |
10 ms |
| Parallel switching of 2 outputs |
| ● for increased power |
No |
| ● for redundant control of a load |
Yes |
| Switching frequency |
| ● with resistive load, max. |
10 Hz |
| ● with inductive load, max. |
0.5 Hz |
| ● on lamp load, max. |
1 Hz |
| Aggregate current of outputs (per group) |
| horizontal installation |
| — up to 40 °C, max. |
2 000 mA |
| — up to 60 °C, max. |
1 000 mA |
| Total current of the outputs (per module) |
| all other mounting positions |
| — up to 40 °C, max. |
1 A |
| Cable length |
| ● Cable length, shielded, max. |
1 000 m |
| ● Cable length unshielded, max. |
600 m |
| Encoder |
| Connectable encoders |
| ● 2-wire sensor |
Yes |
| Interfaces |
| PROFIBUS DP |
| ● Transmission rate, max. |
6 000 kbit/s |
| ● SYNC capability |
Yes |
| ● FREEZE capability |
Yes |
| ● Direct data exchange (slave-to-slave communication) |
Yes |
| Interrupts/diagnostics/status information |
| Alarms |
| ● Alarms |
No |
| Diagnostic messages |
| ● Diagnostic functions |
Yes |
| Diagnostics indication LED |
| ● Bus fault BF (red) |
Yes |
| ● Status indicator digital output (green) |
Yes |
| ● Status indicator digital input (green) |
Yes |
| ● Monitoring 24 V voltage supply ON (green) |
Yes |
| Galvanic isolation |
| between PROFIBUS DP and all other circuit components |
Yes |
| Galvanic isolation digital inputs |
| ● between the channels |
Yes |
| ● between the channels and PROFIBUS DP |
Yes |
| Galvanic isolation digital outputs |
| ● between the channels |
Yes |
| ● between the channels and PROFIBUS DP |
Yes |
| Degree and class of protection |
| Degree of protection to EN 60529 |
|
| ● IP20 |
Yes |
| Ambient conditions |
| Operating temperature |
| ● horizontal installation, min. |
0 °C |
| ● horizontal installation, max. |
60 °C |
| Air pressure |
| ● permissible range, min. |
795 hPa |
| ● permissible range, max. |
1 080 hPa |
| Relative humidity |
| ● Operation, min. |
5 % |
| ● Operation, max. |
95 % |
| Vibrations |
| ● Operation, checked according to IEC 60068-2-6 |
Yes |
| Shock test |
| ● checked according to IEC 60068-2-27 |
Yes |
| Dimensions |
| Width |
145 mm |
| Height |
61 mm |
| Depth |
85.5 mm |
| Weights |
| Weight, approx. |
322 g |
| last modified: |
16.09.2014 |
