- |
SIMATIC DP, ELECTRONIC SUBMODULE, FOR ET200ISP, 2DO RELAY UC60V / 2A |
|
| Input current |
| from load voltage L (without load), max. |
120 mA |
| Power loss |
| Power loss, typ. |
1 W |
| Digital outputs |
| Number of digital outputs |
2 |
| Short-circuit protection |
Yes |
| Output current |
| for signal "1" rated value |
2 A |
| Output delay with resistive load |
| "0" to "1", max. |
8 ms |
| "1" to "0", max. |
3 ms |
| Parallel switching of 2 outputs |
| for uprating |
No |
| for redundant control of a load |
No |
| Switching frequency |
| with resistive load, max. |
0.5 Hz; See data in manual |
| with inductive load, max. |
0.2 Hz; See data in manual |
| Relay outputs |
| Switching capacity of contacts |
| with resistive load, up to 60 °C, max. |
2 A; See data in manual |
| Thermal continuous current, max. |
2 A; See data in manual |
| Cable length |
| Cable length, shielded, max. |
500 m |
| Cable length unshielded, max. |
500 m |
| Interrupts/diagnostics/status information |
| Status indicator |
Yes |
| Substitute values connectable |
Yes |
| Alarms |
| Alarms |
No |
| Diagnostic alarm |
Yes |
| Hardware interrupt |
No |
| Diagnostic messages |
| Diagnostic information readable |
Yes |
| Wire-break |
No; Cannot be determined in contact power circuit |
| Short-circuit |
No; Cannot be determined in contact power circuit |
| Diagnostics indication LED |
| Group error SF (red) |
Yes |
| Status indicator digital output (green) |
Yes; Per channel |
| Ex(i) characteristics |
| Max. values of output circuits (per channel) |
| Uo (output no-load voltage), max. |
60 V |
| Um (fault voltage), max. |
250 V |
| Ta (permissible ambient temperature), max. |
70 °C |
| Galvanic isolation |
| Galvanic isolation digital outputs |
| between the channels |
Yes |
| between the channels and the backplane bus |
Yes |
| between the channels and the load voltage L |
Yes; Channels and power bus |
| Standards, approvals, certificates |
| CE mark |
Yes |
| Use in hazardous areas |
| Type of protection acc. to EN 50020 (CENELEC) |
II 2 G and I M2 Ex eibmb IIC T4; Ex eibmb I |
| Type of protection acc. to KEMA |
07 ATEX 0180 |
| Dimensions |
| Width |
30 mm |
| Height |
129 mm |
| Depth |
136.5 mm |
| Weights |
| Weight, approx. |
280 g |
| Status |
Jul 7, 2014 |
